The material, with nothing left vague
Get to know the material before you put it on your surface.
Proteluna is not mineral glass. It is a flexible 2 mm surface protector, made in a clear or a printed finish. This page explains its composition, its benefits, its limits, compatibility and the right way to care for it.
What 2 mm means
A thickness you can both see and feel.
Two millimetres is the launch specification of the product. The close-up shows the real edge, the flexibility and the way the protector sits on the surface. We do not compare it with toughened glass - that is a different category of material and use.
Clear and Design
The same size. A different look.
The size, shape and thickness stay the same. You decide whether the original surface stays visible or a printed motif is added on top.
Proteluna Clear
Clear finish
A clear finish leaves the surface underneath visible. How the contact looks in the end also depends on the surface and the underside treatment.
Find out more about Clear →Proteluna Design
Printed finish
A printed finish changes how the surface looks. The preview shows the shape and the placement of the motif, not a physical colour proof.
Find out more about Design →Benefits with evidence
What the material gives you in everyday use.
We keep the wording careful and free of absolute promises - we state only what we can back up.
It helps protect against ordinary spills.
It helps limit direct contact between objects and the surface.
It is cleaned with a soft damp cloth.
It can be made to measure in the supported shapes.
It is delivered in the way the packing process confirms.
Surface compatibility
The surface under the protector matters as much as the protector itself.
The protector can be used on a range of smooth, flat surfaces. What differs is mainly how the clear finish behaves in different light and on different surfaces.
| Surface | What to know | Available finish | Status |
|---|---|---|---|
| Wood and veneer | We make both Clear and Design for this surface type. | Clear and Design | Available |
| Laminate | We make both Clear and Design for this surface type. | Clear and Design | Available |
| Matt lacquer | We make both Clear and Design for this surface type. | Clear and Design | Available |
| High gloss | In certain light a reflection or the edge of the film may be visible on high gloss. | Clear and Design | Available |
| Glass | On glass, optical patterning can appear under the clear material. | Clear and Design | Available |
| Stone | We make both Clear and Design for this surface type. | Clear and Design | Available |
We make both Clear and Design for all the surface types listed. The surface type does not change the thickness or the price.
FIRST USE
Unpack. Let it settle. Lay it down.
After transport the material may need a while to return to a flat shape.
Prepare the surface
Clean and dry the surface before laying it down.
Unpack the protector
Unpack the protector on a clean, flat surface.
Let it settle
Give the material time to adjust to room temperature.
Lay it down
Lay it down gradually and smooth it from the centre towards the edges.
Check the result
Check the shape, size and position on the surface.
The exact settling time and orientation are in the confirmed instructions supplied with your order - we do not state them across the board.
Care
Gentle care is the right care.
You do not need any special equipment for everyday cleaning.
Yes
- A soft microfibre cloth.
- Lukewarm water.
- Mild soapy water, where confirmed.
- Wipe up ordinary spills as soon as you can.
- Lift the protector when moving it; don't drag it over a sharp edge.
No
- Abrasive sponges and powders.
- Blades and sharp scrapers.
- Aggressive solvents.
- Hot pots, pans and heated appliances placed directly on it.
- Cutting with a knife directly on the protector.
Documents and certificates
A document belongs to a particular material and version.
A certificate is a valid document tied to a particular material variant and its version. Every certificate card carries the official name, the identifier, the issuer, the date and revision, the exact variant, the scope of the claim, a localised summary that does not widen the meaning, an accessible original PDF file, and a status.
A logo or a seal without a document is not a certificate.We are not showing any certificate here yet.
We will publish documents only once they are valid, versioned and tied to a particular variant. Every card will carry:
- The official name of the document
- A number or identifier
- The issuer
- The date and revision
- The material variant it applies to
- The scope of the claim
- A localised summary
- An accessible original PDF
- Status: valid / superseded / expired
Material FAQ
Questions about the material.
Is Proteluna PVC?
Is it completely odourless?
Is it suitable for contact with food?
Is it heat resistant?
Next step
Choose the finish for your surface.
You will see an estimated product price in Studio before the cart.